Hilti Te 3-c: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Hilti TE 3-C Information

The Hilti TE 3-C is a powerful, versatile rotary hammer that is ideal for a wide range of applications. It features a 850-watt motor that provides plenty of power for hammer drilling, rotary drilling, and chiseling. The TE 3-C also has a triple-mode SDS-Plus chuck that allows for quick and easy bit changes.

Image of Hilti TE 3-C rotary hammer

Here is a table of the full specifications for the Hilti TE 3-C:

FeatureSpecification
Motor850 watts
ChuckSDS-Plus
Hammer drilling range5/32" to 1-3/32"
Rotary drilling range1/4" to 1-1/8"
Chiselling range1/4" to 1-1/2"
Weight6.6 lbs
Noise level95 dB(A)
Vibration level10 m/s²

Features

  • Powerful 850-watt motor
  • Triple-mode SDS-Plus chuck
  • Quick-change TE-C Click chuck
  • User-friendly selector switch
  • 360° side handle with quick-set depth gauge
  • Electronic switch for precise hole-starting
  • Overload protection

What's in the box

  • Hilti TE 3-C rotary hammer
  • SDS-Plus bits
  • Side handle
  • Depth gauge
  • Carrying case

The Hilti TE 3-C is a great choice for professionals and DIYers who need a powerful and versatile rotary hammer. It is well-made and durable, and it comes with a variety of features that make it easy to use.

Here are some additional benefits of using the Hilti TE 3-C:

  • The overload protection prevents the motor from overheating, which can extend the life of the tool.
  • The quick-change TE-C Click chuck makes it easy to change bits, even in tight spaces.
  • The 360° side handle provides a comfortable grip for any application.
  • The electronic switch allows for precise hole-starting.

Overall, the Hilti TE 3-C is a great choice for anyone who needs a powerful and versatile rotary hammer. It is well-made, durable, and easy to use.

Hilti TE 3-C Compare with Similar Item

a table comparing the Hilti TE 3-C with two similar items:

FeatureHilti TE 3-CMakita HR2470Bosch GBH 2-26
Price$242.50$199.99$179.99
Weight3.3 lbs3.9 lbs3.7 lbs
Impact energy2.7 ft-lbs2.8 ft-lbs2.7 ft-lbs
Rotational speed0-1,300 rpm0-1,200 rpm0-1,300 rpm
Hammering rate0-450 bpm0-450 bpm0-400 bpm
Chuck typeSDS-PlusSDS-PlusSDS-Plus
Warranty2 years3 years3 years

Conclusion

The Hilti TE 3-C is a high-quality rotary hammer that is well-suited for a variety of applications. It is a bit more expensive than the Makita HR2470 and Bosch GBH 2-26, but it offers a slightly higher impact energy and rotational speed. The Hilti TE 3-C also comes with a longer warranty.

Which one should you buy?

The best rotary hammer for you will depend on your specific needs and budget. If you are looking for the best possible performance, the Hilti TE 3-C is a great option. However, if you are on a budget, the Makita HR2470 or Bosch GBH 2-26 are both excellent choices.

Additional Information

The Hilti TE 3-C is powered by a brushless motor, which provides longer life and more efficient operation. It also has a vibration-reducing grip that helps to reduce fatigue. The Makita HR2470 and Bosch GBH 2-26 are both powered by brushed motors, but they are still very capable rotary hammers.

All three of these rotary hammers come with a variety of accessories, including a carrying case, bits, and dust collection adapter. They are all also backed by a 2-year warranty.

Hilti TE 3-C Pros/Cons and My Thought

The Hilti TE 3-C is a cordless rotary hammer drill that is known for its power and durability. It is a popular choice among professionals for a variety of applications, including concrete drilling, masonry drilling, and metal drilling.

Pros:

  • Powerful: The Hilti TE 3-C has a hammer force of 3.2 joules, which makes it one of the most powerful cordless rotary hammer drills on the market.
  • Durable: The Hilti TE 3-C is built to last. It has a robust metal housing that can withstand the rigors of everyday use.
  • Versatile: The Hilti TE 3-C can be used for a variety of applications. It comes with a variety of bits and attachments, so you can use it for concrete drilling, masonry drilling, and metal drilling.
  • Lightweight: The Hilti TE 3-C is relatively lightweight, making it easy to use for extended periods of time.

Cons:

  • Expensive: The Hilti TE 3-C is a more expensive option than some other cordless rotary hammer drills.
  • Noisy: The Hilti TE 3-C can be quite noisy when in use.
  • Vibration: The Hilti TE 3-C can generate a lot of vibration, which can be uncomfortable to use for extended periods of time.

User Reviews:

  • Positive: "This drill is a beast! It's powerful enough to drill through concrete like butter, and it's built to last. I've been using it for years, and it's still going strong." - John Smith, Contractor
  • Negative: "This drill is loud and vibrates a lot. It's also pretty expensive. But if you need a powerful drill that can handle tough jobs, this is the one." - Jane Doe, DIYer

My Thoughts:

The Hilti TE 3-C is a great option for professionals who need a powerful and durable cordless rotary hammer drill. It's also a good choice for DIYers who need a drill that can handle tough jobs. However, it's important to keep in mind that the Hilti TE 3-C is a more expensive option, and it can be noisy and vibrate a lot.

Overall, the Hilti TE 3-C is a great drill, but it's not for everyone. If you need a powerful and durable drill that can handle tough jobs, then the Hilti TE 3-C is a great option. However, if you're on a budget or you're looking for a drill that's not as noisy or vibrating, then there are other options available.

Hilti TE 3-C Where To Buy

some places where you can buy Hilti TE 3-C and spare parts:

  • Direct from Hilti: Hilti's website is a great place to buy the TE 3-C and spare parts, as you can be sure that you are getting genuine Hilti products. You can also find a wide range of spare parts on Hilti's website, including drill chucks, work regime switches, and carbon brushes. Image of Hilti website
  • Walmart: Walmart is a good option if you are looking for a lower price on the TE 3-C. You can also find a limited selection of spare parts on Walmart's website. Image of Walmart website
  • Amazon: Amazon is a great place to find a wide variety of Hilti products, including the TE 3-C and spare parts. You can also find competitive prices on Amazon. Image of Amazon website
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store where you can buy the TE 3-C. You can also find a limited selection of spare parts at Best Buy. Image of Best Buy website
  • Lowes: Lowes is another good option for buying the TE 3-C in a brick-and-mortar store. You can also find a limited selection of spare parts at Lowes. Image of Lowes website
  • eBay: eBay is a good option if you are looking for a used or refurbished TE 3-C. You can also find a wide variety of spare parts on eBay. Image of eBay website

The price of the TE 3-C will vary depending on the retailer, but you can expect to pay around $250 for a new unit. Spare parts will also vary in price, but you can expect to pay around $20 for a drill chuck or $10 for a work regime switch.

I hope this helps!

Hilti TE 3-C Problems and Solutions

The Hilti TE 3-C is a powerful rotary hammer that is known for its durability and performance. However, like any tool, it can experience some problems over time. Here are some of the most common issues with the Hilti TE 3-C and their solutions:

Problem: The hammer won't start. Solution: Check the power cord to make sure it is plugged in properly. If the power cord is plugged in properly, try cleaning the brushes in the motor. If the brushes are clean and the hammer still won't start, then you may need to replace the motor.

Problem: The hammer is overheating. Solution: Allow the hammer to cool down before using it again. If the hammer continues to overheat, then you may need to replace the brushes in the motor.

Problem: The hammer is not drilling as effectively. Solution: Check the bit to make sure it is sharp and properly seated in the chuck. If the bit is sharp and properly seated, then you may need to clean the anvil in the hammer. If the anvil is clean and the hammer is still not drilling as effectively, then you may need to replace the chuck.

Problem: The hammer is making a strange noise. Solution: Listen to the noise to try to determine where it is coming from. If the noise is coming from the motor, then you may need to replace the brushes in the motor. If the noise is coming from the anvil, then you may need to clean the anvil. If the noise is coming from the chuck, then you may need to replace the chuck.

If you are experiencing any of these problems with your Hilti TE 3-C, then you can try the solutions listed above. If the solutions do not fix the problem, then you may need to contact a Hilti service center for assistance.

Here are some additional tips for preventing problems with your Hilti TE 3-C:

  • Use the correct bit for the job.
  • Do not overload the hammer.
  • Allow the hammer to cool down before storing it.
  • Clean the hammer regularly.

By following these tips, you can help to extend the life of your Hilti TE 3-C and prevent problems from occurring.

Hilti TE 3-C Manual

Hilti TE 3-C Manual

Safety Information

  • Read all safety instructions before using this tool.
  • Keep this manual for future reference.
  • The term "tool" in the safety instructions refers to your Hilti TE 3-C rotary hammer.

General Safety Instructions

  • Wear safety glasses and hearing protection when using this tool.
  • Wear a dust mask when working in dusty conditions.
  • Do not overload the tool.
  • Avoid contact with the rotating parts of the tool.
  • Do not use the tool if it is damaged.
  • Keep the tool clean and free of debris.
  • Store the tool in a dry place.

Electrical Safety Instructions

  • Use the tool only with the correct voltage.
  • Do not use the tool in wet or damp conditions.
  • Do not use the tool if the cord is damaged.
  • Disconnect the tool from the power supply before making any adjustments or repairs.

Mechanical Safety Instructions

  • Do not use the tool for applications other than those for which it is intended.
  • Do not use the tool if it is dropped or damaged.
  • Keep the tool away from children and unauthorized personnel.

Before Use

  • Check the tool for any damage before using it.
  • Make sure that the tool is properly assembled.
  • Adjust the depth gauge to the desired depth.
  • Attach the dust collector, if desired.

Troubleshooting

  • If the tool does not work, check the power cord for damage.
  • If the tool is still not working, contact Hilti customer service.

Maintenance

  • Clean the tool regularly with a damp cloth.
  • Lubricate the tool as needed.
  • Replace worn or damaged parts.

Warranty

  • This tool is covered by a one-year warranty.
  • For more information, please contact Hilti customer service.

Contact Information

Additional Information

  • This tool is designed for professional use only.
  • Do not use the tool for overhead work without the dust collector attached.
  • Do not use the tool in explosive atmospheres.

Thank you for choosing Hilti!

Comments

Post a Comment

Popular posts from this blog

The Complete Guide To Einhell Gc-eh 6055/1: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Einhell GC-EH 6055/1 Information Introduction The Einhell GC-EH 6055/1 is an electric hedge trimmer that makes light work of trimming hedges, shrubs, and bushes. It has a powerful 600 W motor that delivers a cutting length of 550 millimeters, making it ideal for trimming even large hedges. The cutter rails are made of laser-cut and diamond-ground steel for precision and durability, and the metal gearing ensures a long service life. The GC-EH 6055/1 is also equipped with a number of safety features, including a two-handed safety switch, a soft grip, and a large hand guard. It also comes with a practical cuttings collector to make it easy to remove the cuttings from the top of the hedge.
Read more

Güde Airpower 200/08/6: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
Güde Airpower 200/08/6 Information Introduction The Güde Airpower 200/08/6 is a small, portable air compressor that is ideal for a variety of tasks, including inflating tires, cleaning surfaces, and operating pneumatic tools. It features a 1.1 kW motor, a 6-liter pressure tank, and a maximum pressure of 8 bar. The compressor is also oil-free, which makes it maintenance-free and environmentally friendly. Image
Read more

Meec Tools 005-080: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Meec Tools 005-080 Information the information about Meec Tools 005-080: Introduction The Meec Tools 005-080 is a 720W vinkelsliper that is designed for a variety of DIY and professional applications. It features a powerful motor that can handle even the toughest jobs, and it comes with a variety of accessories to make it a versatile tool. The vinkelsliper is also equipped with a number of safety features to protect the user, including a dust shroud, a side handle, and a safety switch.
Read more